Words You Will Meet in Industrial Architecture
This glossary collects the terms used across Brewhouse Bricks & Beams. Definitions are short and written for readers standing in front of a building, not for specialists. Where a term has its own essay on this site, the entry links to it.
Walls and masonry
- Bond
- The pattern in which bricks are laid. Running, common (American), Flemish and English bond are explained in Detail 3.
- Header / stretcher
- A brick laid with its short end showing (header) or its long face showing (stretcher). Headers tie the layers of a solid wall together.
- Wythe
- One vertical layer of masonry, one brick thick. A solid industrial wall may be three or four wythes deep.
- Lime mortar
- Mortar made mostly of lime and sand, softer and more porous than modern cement mortar; standard before about 1900.
- Repointing
- Raking out decayed mortar and filling the joints with new mortar of compatible strength and appearance.
- Spalling
- Flaking or popping off of a brick’s face, frequently caused by trapped moisture or hard mortar.
- Efflorescence
- White, powdery salt deposits left on masonry as water evaporates from it.
- Pilaster
- A flat, slightly projecting pier on a wall face that looks like a column.
- String course
- A horizontal projecting band of brick or stone running across a facade, often at a floor line.
- Corbel / corbel table
- Courses of brick stepped outward to form a ledge; a row of such projections under a cornice. See Detail 5.
- Parapet
- The part of a wall that continues above the roof line.
- Coping
- The protective cap on top of a parapet or wall.
- Ghost sign
- An old painted advertisement or name that survives, faded, on a brick wall.
Openings
- Voussoir
- One of the wedge-shaped units that make up an arch.
- Springer / keystone
- The first unit of an arch above its support, and the central top unit.
- Segmental arch
- A shallow arch whose curve is less than a half-circle; very common on factories. See Detail 4.
- Jack arch
- A flat arch with bricks set at an angle.
- Lintel
- A horizontal beam of stone, timber or steel spanning the top of an opening.
- Sill
- The horizontal member at the bottom of a window opening, sloped to shed water.
- Double-hung sash
- A window with two sliding frames, one above the other.
- Transom
- A window above a door or above another window, often for extra light or air.
- Wire glass
- Glass with a mesh of wire embedded in it, used for fire resistance in industrial windows and skylights.
Roofs and structure
- Mansard roof
- A roof with a steep lower slope and a shallow upper slope on each side; typical of the Second Empire style. See Detail 2.
- Curb
- The break line between the two slopes of a mansard.
- Dormer
- A window set into a sloping roof, with its own small roof.
- Cresting
- Decorative metalwork along a roof ridge or edge.
- Cupola
- A small structure on top of a roof, often for ventilation or light.
- Monitor roof
- A raised section along the ridge of a roof with windows or louvres in its sides.
- Sawtooth roof
- A series of ridges with one steep glazed face each, usually facing away from direct sun, giving even daylight.
- Clerestory
- A band of windows high in a wall, above adjoining roofs.
- Truss
- A triangulated frame of timber or steel that spans a wide space.
- Mill construction
- Heavy timber posts, beams and thick plank floors designed to resist fire longer than light framing. See Detail 6.
- Fire cut
- An angled cut on a beam end set in a masonry wall, letting the beam fall in a fire without toppling the wall.
- Pintle
- An iron connector between stacked columns, or the pin on which a heavy door hinges.
Brewery and preservation terms
- Gravity brewhouse
- A tall brewhouse in which ingredients move downward from floor to floor. See Detail 1.
- Mash tun
- The vessel in which milled malt is soaked in hot water.
- Wort
- The sweet liquid drained from the mash and boiled with hops before fermentation.
- Lagering cellar
- A cool room or basement where beer was stored to mature.
- Adaptive reuse
- Giving an old building a new use while keeping its significant character.
- Rehabilitation
- In the Secretary of the Interior’s Standards, making a compatible new use possible through repair and alteration while preserving historic features.
- Character-defining feature
- A visible element, material or space that contributes to a building’s historic significance.
- SHPO
- State Historic Preservation Office; in Texas, the Texas Historical Commission fills this role.
Sources
- Cyril M. Harris (ed.), Dictionary of Architecture and Construction.
- National Park Service, Secretary of the Interior’s Standards for the Treatment of Historic Properties.
- Getty Research Institute, Art & Architecture Thesaurus.